The solid wood particle board sheets is an artificial board made of wood or wooden poles and logs. The two sides use fine wood fibers with long wood fibers in the middle. After applying an adhesive, it is glued under the action of heat and pressure. The particle board with melamine veneer. Its cross-section presents a honeycomb-shaped plate.
As a new high-grade environmentally friendly substrate, solid wood particle board is widely used by European and American furniture manufacturers, and the domestic high-end panel furniture market has also begun to adopt this kind of board on a large scale.
Specification
hardwood particle board is a kind of small-diameter wood, thinning wood, wood core, board bark, branch wood, etc. as raw materials, processed by special equipment to grow particle board sheet sizes in 40mm, 70mm, width 5mm, 20mm, thickness 0.3mm, 0.7mm. After drying, sizing and special equipment, the surface core layer chips are laid in criss-cross orientation and then formed by hot pressing.
Advantages
Solid wood particle board is a kind of particle board. The MDF particle board uses wood scraps as the material, the wood fiber particles in the board are larger, and more of the nature of natural wood is retained. e1 grade particle board is a new and environmentally friendly substrate. Because it is spliced with wood chips, its surface is smooth and delicate, without knots, bug eyes and other defects, and it has good stability and uniform material.
In the mdf furniture board industry, solid wood particle board (a type of particle board) or MDF (a type of mdf board sheet) is mostly used. In some panel homes, some substrates use solid wood particle board, and some use dMDF board , So where is the advantage of 18mm particle board?
Strong decorative performance
The surface of the particle board is smooth and fine, without knots, worm holes, warping, and cracking. It has the advantages of high physical and mechanical strength, equal vertical and horizontal strength, sound insulation, mildew resistance, economy, and heat preservation. It is more decorative than other woods.
Warpage is not easy to deform
The solid wood particle board has small warpage and deformation, good dimensional stability, high strength, good stiffness, and it is not easy to bend when hanging heavy clothes. The wood-based panels used in the European furniture market are mainly solid wood particle boards.
Strong nail holding power
The interior of the solid wood particle board is in the shape of particles with a cross-scattered structure. Therefore, the nail holding force is strong, and round nails and screws can be nailed. These machinable properties are obviously better than medium density fiberboard, but there is still a gap compared with solid wood furniture.
Good processing performance
The density of solid wood particle board is generally greater than that of solid wood, and its physical and mechanical properties are excellent. Among all kinds of man-made boards, it is closest to natural wood and better than natural wood. Therefore, the machine has excellent processing performance and can be processed with the processing configuration and essentials for processing natural firewood. The interior of the solid wood particle board is in the shape of particles with a cross-distributed layout. The particles are arranged in a certain direction. Its longitudinal bending strength is much greater than that of the transverse direction. It can be sawed, sanded, planed, drilled, nailed, filed, etc. Processing is a good material for the mdf board furniture industry.
Shortcoming
Glue is used in the process, and the environmental performance is slightly worse than that of solid wood board; the surface is not smooth; the flatness of solid wood particle board is not as good as MDF, and it is difficult to make curvature and shape.
Environmental performance
Wood particle board is used wood scraps. This nature determines its environmental protection and avoids the second waste of materials. In foreign countries, 70% of its furniture base materials are made of solid wood particle board. Every person on earth should contribute to the sustainable development of the world. Generally, the solid wood particle board of E1 environmental protection standard has low formaldehyde content, and the environmental protection performance reaches the national standard.
Cost-effective analysis
1. The source of raw materials for plywood and blockboard wood will become more and more difficult, and the cost and price will increase. With the increasing scarcity of natural forest resources and the reduction of large-diameter mdf timber, the raw materials of wood-based panels will shift from processing residues to relying on the utilization of artificial fast-growing forests and small-diameter timber. The development of solid wood particle board is in line with this direction.
2. The solid wood particle board basically retains the natural characteristics of wood and has good physical and mechanical properties. The main feature of mdf osb is that the longitudinal bending strength is much higher than the transverse bending strength, so it is suitable for structural materials, which is incomparable to medium density fiberboard and ordinary particleboard.
3. solid particle board has good mechanical properties similar to plywood, and is suitable for decoration structural materials. From the aspects of processing performance, processing quality, service life and economic benefits, laminated particle board is an ideal material in furniture manufacturing and interior decoration.
4. The 18mm particle board price will be more competitive. In the future, the raw material cost of solid wood particle board will be further reduced, and the price of the product will also be reduced, which is not a small advantage for other boards.